Adhesives & Construction

Wind Energy

Epoxy materials for wind turbine blades and composite components requiring controlled processing, effective fiber wet-out, consistent curing, and durable mechanical performance.

Discuss Your Requirements

Wind Energy Composite Systems: Material Selection Priorities

Wind turbine composite manufacturing requires epoxy systems that perform reliably both during processing and after cure.

Close-up of liquid resin impregnating woven fiberglass fabric, illustrating resin flow and fiber wet-out in composite lamination.

Low Viscosity & Fiber Wet-Out

Low-viscosity systems help resin move through reinforcement materials and support effective fiber wetting during infusion and lay-up processes.
Workers positioning fiberglass reinforcement layers inside a large wind turbine blade mold during composite manufacturing.

Controlled Working Time

Adequate processing time is important for large composite components where resin distribution, fiber impregnation, and manufacturing operations may require an extended application window.
Close-up cross-section of thick fiberglass composite laminate with translucent resin layers used in wind turbine blade manufacturing.

Exotherm Management

Controlled reaction heat helps maintain more stable processing, particularly in thicker laminates and larger composite structures.
Close-up of a wind turbine rotor hub and bolted blade connection, highlighting structural components used in wind energy applications.

Mechanical Strength & Toughness

Set the mechanical performance and toughness targets for the structural composite component, then compare epoxy systems against them.
Detailed cross-section of a multilayer fiberglass composite laminate with uniform resin distribution and reinforced fiber layers.

Consistent Cure Control

Consistent cure behavior supports stable processing and predictable development of final composite properties.
Molded carbon fiber composite structural component with complex curved geometry and visible laminated reinforcement layers.

Process Flexibility

Choose the epoxy system to suit resin infusion, wet lay-up, lamination, bonding or another composite manufacturing process.

Recommended Products

WINCURE 3280​

CURING AGENT
Moisture-tolerant epoxy curing agent for protective coating systems exposed to humidity and low temperature. Strong resistance to amine blush and water spotting, with durable coating performance.
Request TDS

WINMIDE 190X70

POLYAMINDE
Polyamide curing agent suited to epoxy primers and protective coatings. Good adhesion, balanced flexibility, and dependable water resistance for marine and anti-corrosion applications.
Request TDS

WINMIDE 2366

CURING AGENT
Low-viscosity curing agent supporting good workability, substrate wetting, and formulation flexibility for marine maintenance coatings.
Request TDS

WINEPOXY 225H

RESIN
Modified epoxy resin offering good flow, low viscosity, and reliable compatibility with curing agents for marine and industrial coatings.
Request TDS

Explore Materials for Your Application

Browse our epoxy resins, curing agents, diluents and modifiers, or request technical data sheets to identify suitable materials for your formulation and performance requirements.

Epoxy Curing Agents

Epoxy Diluents & Modifiers

Epoxy Resins

Request TDS