COMPOSITES & WIND ENERGY

Epoxy Materials for Composite Manufacturing and Structural Performance

WINBOND supplies epoxy resins, curing agents, and formulated systems for composite manufacturing, bonding, repair, and wind energy applications.

Solutions Across Composite Applications

Composite applications vary widely in reinforcement, component geometry, manufacturing method, and performance requirements.

Wind turbines standing above yellow flowering fields under a blue sky

Wind Energy

Epoxy materials for composite components used in wind energy applications, with selection based on viscosity, working time, fiber wet-out, cure behavior, and mechanical performance.

Gloved hand brushing resin onto layers of woven fiberglass fabric

Fiberglass & FRP

Epoxy systems for fiberglass-reinforced plastics and structural composite parts produced through wet lay-up, lamination, infusion, and related manufacturing processes.
Workers preparing green composite boat hull molds in a factory

Marine Composites

Epoxy materials for marine composite components requiring controlled processing, fiber wet-out, bonding performance, and durable mechanical properties under demanding service conditions.
Technician inspecting a partially assembled car body under bright inspection lights

Automotive & Transportation Composites

Epoxy materials for lightweight composite components in automotive and transportation applications, with options for controlled processing, bonding, toughness, and structural performance.
Technicians inspecting long carbon fiber composite components on a laboratory workbench

Composite Bonding & Repair

Epoxy materials for bonding, assembly, reinforcement, and repair of composite parts where adhesion, toughness, working time, and mechanical performance must be balanced.

PERFORMANCE-FOCUSED FORMULATION

Built Around Your Requirements

WINBOND supports material selection and formulation development according to reinforcement type, processing method, component size, working time, curing conditions, and required mechanical performance.

Laboratory technician measuring resin flow time with a viscosity cup and stopwatch

Low Viscosity & Fiber Wet-Out

Low-viscosity systems support effective resin flow and fiber wetting in infusion, wet lay-up, and other composite processes.

Controlled Working Time

Different cure profiles provide suitable processing windows for different component sizes, manufacturing methods, and production cycles.

Exotherm Control

Controlled reaction heat supports more stable processing in thicker laminates, larger components, and extended composite manufacturing cycles.

Mechanical Strength & Toughness

Select the epoxy system by the strength, toughness, impact resistance and long-term structural performance the component requires.

Adhesion & Bonding

Material selection can support sound bonding between composite parts and other engineering substrates in assembly and repair applications.

Process Flexibility

Resin, curing-agent, and formulation combinations can be adjusted for infusion, wet lay-up, lamination, bonding, and repair processes.